Fiesta Tres Help

Ok, so I got my Fiesta Tres today. After a couple drops, the yoyo’s gap became offset resulting in some unpleasant vibe. With the YYJ Lock and Bolt system, is there anyway to fix/tune it?

Check to see if the axle is bent. Remove it and roll it on a flat surface. If it doesn’t roll smooth it’s bent and should be replaced. It’s a stock hardware item set screw. If you can’t get a set screw get a regular screw of the same thread size and cut the head off. File the cut end smooth.

1 Like

I checked, the axle was fine. From closer inspection I can see that the metal spacer thing holding the bearing and response pads is popping out on an angle.