This is a concept design I did.
an undersize yoyo with 52 mm diameter.
As I still waiting for the prototype of the Angkasa, I do many concept design on my free time.
But I am not happy with this design.
My goal with Capital yoyo is to make a unique yoyo, yet have good performance, and this design is just like another V-shape yoyo.
I will continue to make adjustment until I have a design that I like.
and I hope I can make an undersize yoyo when the Angkasa is finished.
will be back to the drawing board and increase a weight a little.
note that the two Angkasa on the back is an old prototype, the first one from 2010.
and the FHZ cap? no idea what they doing there…
this is another concept that has been in work for almost a year, but I never settle on how it should be.
first of all, this is a 4A yoyo.
I want to make a metal core inside a derlin shell, kinda what you see on Yonity Kung or YoyoJoker Satelite, but I want to make the metal core removable, so I make some kind or retaining mechanism similar to Adegle Roc.
This yoyo shall be called Jupiter
and I wanted it to be the 4th on Capital Yoyo line up.
You want to make a 4a yoyo, that comes apart around a metal core? Oh boy; That’s going to be difficult. Either it’ll be to loose where it slips and vibes, or too tight where it sticks and vibes. That is an ambitious goal.
Thanks man, mainly for saying that it will be difficult, not impossible.
I know that would be hard, weight distribution and fittings and all of that, but I still want to try it.
Thanks man, at least the_zee kow that it will be difficult.
It still a long way to go though, 4th yoyo is pretty far away.
What I want is to make an undersize yoyo after the angkasa.
difficult maybe, but there’s definately things that you could implement in your design to perfect alignment of the delrin and metal inserts. Either way it’s worth a try! plus so what if a 4a yoyo vibes a little?
Yes, I know it has been done, and I used to have a Werrd Bad Decision, which was a similar thing. I just think it’s too much effort to get it with the perfect press-fit to work perfectly.
It’s been quite some time.
a really long time in fact, that this thread haven’t been updated.
I think I really owe an apology, because many things happen, there are less and less time for me to run Capital yoyo.
well I’m back now, sort of.
The Angkasa has been through it’s prototyping stage, for almost 2 years, even more than that for the first angkasa prototype, I finally think that I got the right one.
For the mean time, please enjoy this picture of all the prototype that I’ve been working on.