How Can You make an Axiom sleep longer?

[wyatt1997]

How Can You make an Axiom sleep longer?

[BrickM3]

I noticed in another thread that someone was having trouble with the flush silicone response on their Legacy where the adhesive backing was still on the silicone o-rings.  I checked it out on my Axiom and the same thing was present.  If you use a safety pin or something similar, peel the o-ring out of the recessed area and peel off the white backing, then reseat the rings.  This helped my Axiom bind a good bit tighter, and I'm able to get stronger throws.  Thus, longer sleep times. 

How long is yours sleeping?
Do you still have the stock bearing?
I replaced mine with a KK.

[wyatt1997]

It's not mine but my friend's and he still has the stock bearing in it he's getting a kk. HE gets  a 1 minute 30 second sleeper

[yoyoman]

wyatt1997 you have been inactive for quite a while, what happend? and have you had fun with your GM2?

[Robert2393]

has he ever cleaned it? if not try cleaning and thin lubing. Later and remember keep it spinning.

[Michael17x]

has he ever cleaned it? if not try cleaning and thin lubing. Later and remember keep it spinning.

Or he could try using the yoyo a little more just to break in a bearing. I always find breaking in a yoyo is more satisfactory than cleaning one. Plus cleaning can cause rust if you don't use the right stuff.